Standard Features
Isolation between input and output
Substantial Input Filter
Stabilised output voltage
Convection cooled
Output 12V DC +/- 2%
Output 24V DC +/- 2%
Protection for:
                     reverse input polarity (fuse)
                     load dump
                     overload (by current limiting)
                     overtemperature (by current limiting)
                     output over voltage (shutdown, auto re-start)
                     short circuit output (by current limiting)
 

General Specifications
Weight : 500g
Efficiency: typically 85% at full load
Ambient Operating Temperature : -20 / +450C
Max. temperature increase 30 degrees by full load for 30 minutes at an ambient temperature of 20 degrees.
Dimensions (l x w x h) : 152mm x 88mm x 49mm
Input & Output Connections: 6.3mm x 0.8mm fastons

Special Versions
Custom Voltages available on request

The Technology
The MDCI 100 range of DC-DC Converters use high frequency switched mode technology for high efficiency, small size and light weight.

Isolation
Isolation between input and output cures difficult ground loop problems, allowing optimum wiring in complex systems. This can avoid noisy power lines degrading signal lines.